esphome: name: updownlight esp8266: board: esp01_1m restore_from_flash: true # Store the current Light Color in the flash every miniute only (MAX) # The RAM will checked every minute - if there was a change in light color, # this new color will be stored and restored on next boot (power off & on) preferences: flash_write_interval: 1min # Enable logging logger: # Enable Home Assistant API api: encryption: key: "2M3DWxk37LQNhf8ZCanRyh1eVcGWd82HcuqHyp4mvzU=" ota: password: "c4947f215eaa994ca91fa4d77db9552f" wifi: ssid: !secret wifi_ssid password: !secret wifi_password # Enable fallback hotspot (captive portal) in case wifi connection fails ap: ssid: "Updownlight Fallback Hotspot" password: "qye5ppI6crG4" captive_portal: sensor: - platform: wifi_signal name: "Updownlight WiFi Signal" update_interval: 60s light: - platform: rgbww name: updownlight id: updownlight gamma_correct: 2.8 red: red green: green blue: blue cold_white: cold_white warm_white: warm_white cold_white_color_temperature: 6200 K warm_white_color_temperature: 2800 K color_interlock: true restore_mode: RESTORE_AND_ON effects: - strobe: name: Strobe Effect colors: - state: True brightness: 80% red: 80% green: 0% blue: 80% duration: 500ms - state: False duration: 250ms - state: True brightness: 80% red: 0% green: 80% blue: 0% duration: 500ms - flicker: name: Flicker Effect alpha: 95% intensity: 2.0% - random: name: Slow Random Effect transition_length: 12s update_interval: 10s - random: name: Fast Random Effect transition_length: 4s update_interval: 5s output: - platform: esp8266_pwm id: red pin: GPIO4 - platform: esp8266_pwm id: green pin: GPIO12 - platform: esp8266_pwm id: blue pin: GPIO14 - platform: esp8266_pwm id: cold_white pin: GPIO5 max_power: 0.85 - platform: esp8266_pwm id: warm_white pin: GPIO13 max_power: 0.85